Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Tobita, Minoru*; Goto, Katsunori*; Omori, Takeshi*; Osone, Osamu*; Haraga, Tomoko; Aono, Ryuji; Konda, Miki; Tsuchida, Daiki; Mitsukai, Akina; Ishimori, Kenichiro
JAEA-Data/Code 2023-011, 32 Pages, 2023/11
Radioactive wastes generated from nuclear research facilities in Japan Atomic Energy Agency are planning to be buried in the near surface disposal field as trench and pit. Therefore, it is required to establish the method to evaluate the radioactivity concentrations of radioactive wastes until the beginning of disposal. In order to contribute to the study of radioactivity concentration evaluation methods for radioactive wastes generated from nuclear research facilities, we collected and analyzed concrete samples generated from JRR-3, JRR-4 and JAERI Reprocessing Test Facility. In this report, we summarized the radioactivity concentrations of 23 radionuclides (H, C, Cl, Ca, Co, Ni, Sr, Nb, Ag, Cs, Ba, Eu, Eu, Ho, U, U, U, Pu, Pu, Pu, Am, Am, Cm) which were obtained from radiochemical analysis of the samples in fiscal years 2021-2022.
Aono, Ryuji; Mitsukai, Akina; Tsuchida, Daiki; Konda, Miki; Haraga, Tomoko; Ishimori, Kenichiro; Kameo, Yutaka
JAEA-Data/Code 2023-002, 81 Pages, 2023/05
Radioactive wastes generated from nuclear research facilities in Japan Atomic Energy Agency are planning to be buried in the near surface disposal field as trench and pit. Therefore, it is required to establish the method to evaluate the radioactivity concentrations of radioactive wastes until the beginning of disposal. In order to contribute to this work, we collected and analyzed the samples generated from JRR-2, JRR-3 and Hot laboratory facilities. In this report, we summarized the radioactivity concentrations of 20 radionuclides (H, C, Cl, Co, Ni, Sr, Nb, Tc, Ag, I, Cs, Eu, Eu, U, U, Pu, Pu, Pu, Am, Cm) which were obtained from radiochemical analysis of the samples in fiscal year 2020.
Tobita, Minoru*; Konda, Miki; Omori, Takeshi*; Nabatame, Tsutomu*; Onizawa, Takashi*; Kurosawa, Katsuaki*; Haraga, Tomoko; Aono, Ryuji; Mitsukai, Akina; Tsuchida, Daiki; et al.
JAEA-Data/Code 2022-007, 40 Pages, 2022/11
Radioactive wastes generated from nuclear research facilities in Japan Atomic Energy Agency are planning to be buried in the near surface disposal field. Therefore, it is required to establish the method to evaluate the radioactivity concentrations of radioactive wastes until the beginning of disposal. In order to contribute to this work, we collected and analyzed concrete, ash, ceramic and brick samples generated from JRR-3, JRR4 and JRTF facilities. In this report, we summarized the radioactivity concentrations of 24 radionuclides (H, C, Cl, Ca, Co, Ni, Sr, Nb, Tc, Ag, I, Cs, Ba, Eu, Eu, Ho, U, U, Pu, Pu, Pu, Am, Am, Cm) which were obtained from radiochemical analysis of the samples in fiscal years 2020-2021.
Tsuchida, Daiki; Mitsukai, Akina; Aono, Ryuji; Haraga, Tomoko; Ishimori, Kenichiro; Kameo, Yutaka
JAEA-Data/Code 2022-004, 87 Pages, 2022/07
Radioactive wastes generated from nuclear research facilities in Japan Atomic Energy Agency are planning to be buried in the near surface disposal field. Therefore, it is required to establish the method to evaluate the radioactivity concentrations of radioactive wastes until by the beginning of disposal. In order to contribute to this work, we collected and analyzed samples generated from JPDR, JRR-3 and JRR-4. In this report, radioactivity concentrations of 20 radionuclides (H, C, Cl, Co, Ni, Sr, Nb, Tc, Ag, I, Cs, Eu, Eu, U, U, Pu, Pu, Am, Cm) were determined based on radiochemical analysis and summarized as basic data for the study of evaluation method of radioactive concentration.
Tobita, Minoru*; Haraga, Tomoko; Endo, Tsubasa*; Omori, Hiroyuki*; Mitsukai, Akina; Aono, Ryuji; Ueno, Takashi; Ishimori, Kenichiro; Kameo, Yutaka
JAEA-Data/Code 2021-013, 30 Pages, 2021/12
Radioactive wastes generated from nuclear research facilities in Japan Atomic Energy Agency are planning to be buried in the near surface disposal field. Therefore, it is required to establish the method to evaluate the radioactivity concentrations of radioactive wastes until the beginning of disposal. In order to contribute to this work, we collected and analyzed concrete samples generated from JPDR facility. In this report, we summarized the radioactivity concentrations of 21 radionuclides (H, C, Cl, Ca, Co, Ni, Sr, Nb, Ag, Cs, Eu, Eu, Ho, U, U, Pu, Pu, Pu, Am, Am, Cm) which were obtained from radiochemical analysis of the samples in fiscal year 2018-2019.
Tsuchida, Daiki; Haraga, Tomoko; Tobita, Minoru*; Omori, Hiroyuki*; Omori, Takeshi*; Murakami, Hideaki*; Mitsukai, Akina; Aono, Ryuji; Ishimori, Kenichiro; Kameo, Yutaka
JAEA-Data/Code 2020-022, 34 Pages, 2021/03
Radioactive wastes generated from nuclear research facilities in Japan Atomic Energy Agency are planning to be buried in the near surface disposal field. Therefore, it is required to establish the method to evaluate the radioactivity concentrations of radioactive wastes until the beginning of disposal. In order to contribute to this work, we collected and analyzed concrete samples generated from JRR-3 and JPDR. In this report, we summarized the radioactivity concentrations of 22 radionuclides(H, C, Cl, Ca, Co, Ni, Sr, Nb, Ag, Ba, Cs, Eu, Eu, Ho, U, U, Pu, Pu, Am, Am, Cm) which were obtained from radiochemical analysis of the samples.
Aono, Ryuji; Mitsukai, Akina; Haraga, Tomoko; Ishimori, Kenichiro; Kameo, Yutaka
JAEA-Data/Code 2020-006, 70 Pages, 2020/08
Radioactive wastes which generated from research and testing reactors in Japan Atomic Energy Agency are planning to be buried at the near surface disposal field. Therefore, it is required to establish the method to evaluate the radioactivity concentrations of radioactive wastes by the time it starts disposal. In order to contribute to this work, we collected and analyzed the samples generated from JPDR and JRR-4. In this report, we summarized the radioactivity concentrations of 19 radionuclides (H, C, Cl, Co, Ni, Sr, Nb, Tc, Ag, I, Cs, Eu, Eu, U, U, Pu, Pu, Am, Cm) which were obtained from radiochemical analysis of those samples.
Han, X.*; Shen, X.*; Yamamoto, Toshihiro*; Nakajima, Ken*; Sun, Haomin; Hibiki, Takashi*
International Journal of Heat and Mass Transfer, 144, p.118696_1 - 118696_19, 2019/12
Times Cited Count:15 Percentile:64.13(Thermodynamics)Xiao, Y.*; Shen, X.*; Miwa, Shuichiro*; Sun, Haomin; Hibiki, Takashi*
Konsoryu Shimpojiumu 2018 Koen Rombunshu (Internet), 2 Pages, 2018/08
In order to develop constitutive equations of two-fluid model in rod bundle flow channels, experiments of adiabatic air-water upward two-phase flow in 66 rod bundle flow channel were performed. Local flow parameters such as void fraction, interfacial area concentration (IAC) and so on were measured by a double-sensor optical probe. The area-averaged void fraction and IAC data were compared with the predictions from a drift-flux model and an IAC correlation.
Shen, X.*; Schlegel, J. P.*; Hibiki, Takashi*; Nakamura, Hideo
Nuclear Engineering and Design, 333, p.87 - 98, 2018/07
Times Cited Count:11 Percentile:34.62(Nuclear Science & Technology)Shen, X.*; Sun, Haomin; Deng, B.*; Hibiki, Takashi*; Nakamura, Hideo
Proceedings of 17th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-17) (USB Flash Drive), 14 Pages, 2017/09
An experimental study on the upward bubbly air-water flows in a vertical large-diameter square duct have been performed by using four-sensor probes. The four-sensor probe were applied in the local measurements at 3 axial positions along the flow direction to obtain interfacial area concentration, 3-D bubble velocity vector and bubble diameter. The obtained void fraction, interfacial area concentration, 3-D bubble velocity vector and bubble diameter provided valuable insight into the flow structure and will serve as a valuable database to develop the mechanistic models for interfacial area transport equation sources and sinks.
Shen, X.*; Sun, Haomin; Deng, B.*; Hibiki, Takashi*; Nakamura, Hideo
Progress in Nuclear Energy, 89, p.140 - 158, 2016/05
Times Cited Count:23 Percentile:89.61(Nuclear Science & Technology)An experimental study was performed on the local structure of upward air-water two-phase flow in a vertical large diameter square duct by using a four-sensor probe. The four-sensor probe method classifying spherical and non-spherical bubbles was applied as a key measurement way to obtain local parameters such as 3-D bubble velocity vector, bubble diameter and interfacial area concentration. Both the local void fraction and interfacial area concentration indicated radial core-peak and wall-peak distributions at low and high liquid flow rates respectively. The 2 components of the bubble velocity vector in the cross-section revealed that there exists a rotating secondary flow in the octant symmetric triangular area and the magnitude of the rotating secondary flow increases with the liquid flow rate. Some of constitutive correlations of drift-flux model and interfacial area concentration are reviewed to study their predictabilities against the present data.
Nishi, Hiroshi
Journal of Nuclear Materials, 329-333(Part2), p.1567 - 1570, 2004/08
Times Cited Count:9 Percentile:52.57(Materials Science, Multidisciplinary)Elastic-plastic finite element analysis was performed for low cycle fatigue behavior of stainless steel/alumina-dispersion-strengthened copper (DS Cu) joint in order to investigate the fatigue life and the fracture behavior of the joint. As the results, a strain concentration was occurred near the interface of DS Cu for small strain range, however, in the DS Cu for large strain range. The fatigue life and fracture point were evaluated taking account for the strain concentration. The fatigue life and fracture point were consistent with those of the low cycle fatigue test.
Kai, Tetsuya; Harada, Masahide; Teshigawara, Makoto; Watanabe, Noboru; Ikeda, Yujiro
Nuclear Instruments and Methods in Physics Research A, 523(3), p.398 - 414, 2004/05
Times Cited Count:36 Percentile:89.19(Instruments & Instrumentation)Neutronic performance of a coupled hydrogen moderator was studied as a function of para hydrogen concentration, moderator thickness, height and premoderator thickness. It was found that a thick (120140mm) moderator with 100% para hydrogen was optimal to provide the highest time- and energy- integrated neutron intensity below 15 meV together with the highetst possible pulse-peak intensity. Low-energy neutron distribution on the moderator viewed surface was found to exhibit an intensity-enhanced region at a picture frame part near premoderator. The rather peculiar distribution suggested that the moderator and the viewed surface must be designed so as to take the brighter region near premoderator in use.
Okuno, Hiroshi; Akiyama, Hideo*; Mochizuki, Hiroki*
Journal of Nuclear Science and Technology, 40(1), p.57 - 60, 2003/01
Times Cited Count:1 Percentile:10.87(Nuclear Science & Technology)Low-level waste (LLW) drums are required to transport as fissile material if the current IAEA's Regulations for the Safe Transport of Radioactive Material are rigorously applied. This problem is a consequence that water contents of concrete in LLW drums contained deuterium (D) in quantities more than 0.1% of fissile material mass, therefore they are not excepted from packages containing fissile material. Consideration of differences in the absorption cross sections of light hydrogen and D shows that the relative increase in the neutron multiplication factor by a presence of D in natural water for hydrogen (H)-moderated systems is not larger than 0.015%. A numerical calculation confirms that the infinite multiplication factor of a mixture of U-metal and water in a U/H mass ratio of 5% increases proportionally to the D/H atomic ratio, and that its relative increase is less than 0.03% for the D/H atomic ratio of 0.015%. The limiting fissile-to-H mass ratio of 5% in the exception rule is concluded to be applicable to H-moderated systems including D in natural water.
Nishihara, Tetsuo; Hada, Kazuhiko
Nihon Genshiryoku Gakkai-Shi, 41(5), p.571 - 578, 1999/05
Times Cited Count:5 Percentile:40.62(Nuclear Science & Technology)no abstracts in English
Watanabe, Tadashi; Ebihara, Kenishi
Nucl. Eng. Des., 188(1), p.111 - 121, 1999/00
Times Cited Count:6 Percentile:45.48(Nuclear Science & Technology)no abstracts in English
Sakurai, Satoshi; Arakawa, Takuya*;
Journal of Nuclear Science and Technology, 35(5), p.365 - 369, 1998/05
Times Cited Count:0 Percentile:0.01(Nuclear Science & Technology)no abstracts in English
Kumamaru, Hiroshige; ; Murata, Hideo; Kukita, Yutaka; Akiyama, Mamoru*; *; *; *; *; *; et al.
Proc. of ASMEJSME 4th Int. Conf. on Nuclear Engineering 1996 (ICONE-4), 1(PART B), p.669 - 674, 1996/00
no abstracts in English
Noguchi, Hiroshi; Murata, Mikio
Nihon Genshiryoku Gakkai-Shi, 33(4), p.360 - 362, 1991/04
Times Cited Count:2 Percentile:51.2(Nuclear Science & Technology)no abstracts in English